|
Picture |
Model # (Part
Number) |
Description |
In Stock
Qty |
|
 |
2LM5R
(16542) |
MULTI-BEAM: 2-wire AC Logic Module
Range: depends on sensor; Input: on power block
Function: OFF-delay
Interconnecting Pins |
5 |
 |
2SBL
2L/SB-2L |
MULTI-BEAM: 2-wire scanner block -
Retro
Range: 2.5 cm-9 m; Input: depends on power block
Output: depends on power block
Interconnecting Pins |
2 |
 |
3LM5-14
(16555) |
MULTI-BEAM: Logic Module
Function: On & Off Delays |
1 |
 |
3PBA
(16554) |
MULTI-BEAM: Power Block |
1 |
 |
AC-6
(16001) |
Cabling Accessories, Wire Guard
2 m (6.5 ft) length of flexible steel conduit
I.D. 7.9 mm (0.31 in); 11.2 mm (0.44 in) |
1 |
|
 |
AP400-040 (16007) |
Remote Sensor: AP400 Aperture
1.0 mm (0.04 in ) diameter
Use with Opposed Mode LR400/PT400 Sensors |
11 |
 |
B3-1 |
B3-1500 Photoelectric Amplifier
Plug-in Logic Module
Latching Relay, Output latches on and is externally reset
Input: 9-16 Volts AC or 12-20 Volts DC
Output: 15 Volts DC, 0.250 Amps Max. |
2 |
 |
B3-3 |
B3-1500 Photoelectric Amplifier
Plug-in Logic Module
Close Differential On-Off Relay
Input: 9-16 Volts AC or 12-20 Volts DC
Output: 15 Volts DC, 0.250 Amps Max. |
3 |
 |
B3-4 |
B3-1500
Photoelectric Amplifier Plug-in Logic Module
High Gain On-Off Relay for operation at very low light levels
Input: 9-16 Volts AC or 12-20 Volts DC
Output: 15 Volts DC, 0.250 Amps Max. |
1 |
 |
B3-4L |
B3-1500 Photoelectric Amplifier
Plug-in Logic Module
Latching High Gain On-Off Relay
Input: 9-16 Volts AC or 12-20 Volts DC
Output: 15 Volts DC, 0.250 Amps Max. |
9 |
 |
B4-1500A
(16026) |
Chassis Systems: AC-coupled Plug-in
Amplifier
For Registration mark, small part sensing
Function: One-shot; Input:12-18Vdc-12Vac
Output: SPST Normally-open NPN
Requires BRB wiring chassis |
1 |
 |
BA23S (17210) |
Glass Fiber Optic, Type: bifurcated,
Description: 90°
Optical fiber diameter (mm): 3.2
Optical fiber diameter (in): .125
Diffuse Mode Bifurcated Glass Fiber 36 long, 0.125
dia. Bundle
Stainless Steel Sheath, Right angle sensing tip |
1 |
 |
BEC-1 |
Chassis |
2 |
 |
BEC-3 (16071) |
BEC Series On/Off Logic Module |
2 |
 |
BEC-5
(16075) |
BEC Series On Delay Logic Module |
1 |
 |
BEC-5R
(16076) |
BEC Series Off Delay Logic Module |
1 |
 |
BENC-1 |
NEMA
1 E nclosure |
1 |
 |
BIC-10 |
BIC Ratchet Module, Plug-in Counter
Module
Input: 9-16 Volts AC or 12-20 Volts
DC
Output: 15 Volts DC, 0.250 Amps Max. |
7 |
 |
BIC-10K
(16101) |
BIC 4 Digit Preset Counter Plug-in
Module
Input: 11-14 Volts AC or 12-18
Volts DC
Output: Open collector NPN transistor with emitter grounded,
15 Volts DC, 0.250 Amps Max. |
1 |
 |
BIC-16P |
BIC Programmable Preset Counter Plug-in
Module
Input: 9-16 Volts AC or 12-20
Volts DC
Output:
15 Volts DC, 0.250 Amps Max. |
3 |
 |
BR-1R (16125) |
Reed Relay
SPDT 12 VDC |
4 |
 |
BR-2R (16129) |
Reed Relay
DPDT 12 VDC |
16 |
 |
BRB-L (16145) |
Chassis |
1 |
 |
BRB-S (16151) |
Basic Control Chassis |
1 |
 |
BRT-1 (16162)
RR-3 |
Retroreflective Target:
Circular - diameter = 25mm
Reflectivity Factor: 1.0
Max. Temp.= 65 degrees C, Plastic - no mounting included |
176 |
 |
BRT-1.5
(16163)
RF-10 |
Retroreflective Target Disc:
Circular - diameter = 46mm
Reflectivity Factor: 1.0
Max. Temp.= 65 degrees C, Plastic - no mounting included |
191 |
 |
BRT-.6
(16161) |
Retroreflective Target: Circular - diameter = 20mm
Reflectivity Factor: 1.0
Max. Temp.= 65 degrees C
Plastic - no mounting included |
172 |
 |
CF7-16 |
Compression Fitting - Thread 11.2 mm (0.44 in)
May be used with plastic or flexible steel conduit, For SM512 Series Sensors
and Remote Sensors: SP300EL, SP300RL, WP300D, WP300L, LR200 and PT200 |
4 |
 |
CM20-1
(16204) |
Lamp CM20-1 For
FO2-BG |
4 |
 |
IR23P
(17335) |
Glass Fiber Optic, Type:
individual
Description: rectangular
Optical fiber diameter (mm): 3.2, (in): .125 |
2 |
 |
FO2BG
(16224) |
Photoelectric Scanner Lamp |
5 |
 |
L16 (16279) |
Lens |
9 |
 |
L16FSS
(17567) |
H igh
Temperature Lens |
1 |
 |
LCMB (16283) |
MULTI-BEAM: Lower Cover
Fits all MULTI-BEAM Sensor Blocks
Includes: Four gaskets
Also includes: Four stainless steel screws |
4 |
|
 |
LM4-2 (16290) |
MULTI-BEAM: Logic Module
Range: depends on sensor; Input: on power block
Function: one-shot (retriggerable)
Interconnecting Pins |
2 |
|
 |
LM5 (16294) |
MULTI-BEAM: Logic Module
Range: depends on sensor; Input: on power block
Function: ON-delay
Interconnecting Pins |
1 |
|
 |
LM8-1 (16302) |
MULTI-BEAM: Logic Module
Range: depends on sensor; Input: on power block
Function: delayed one-shot
Interconnecting Pins |
1 |
 |
LMT (16304) |
MULTI-BEAM: Test Module
May be used with all 2- 3- and 4-wire MULTI-BEAM
sensors to check operation of sensor block
and power block |
1 |
|
 |
LP400WB
(25605) |
Remote Sensor: Divergent Diffuse
Range: 76 mm
Use Amps: MICRO: MA3-4 MA3-4P; MAXI: CM Series
2 m (6.5 ft) cable |
2 |
 |
LR200B
(16308) |
Scanner
has hot LED /880NM |
2 |
 |
LR250 |
Remote Sensor: Emitter
Range: 2.4 m
Use Amps: MICRO: MA3-4 MA3-4P; MAXI: CM Series
2 m (6.5 ft) cable |
1 |
|
 |
LR400 (16312) |
Remote Sensor: Emitter
Range: 2.4 m
Use Amps: MICRO: MA3-4,
MA3-4P; MAXI: CM Series
2 m (6.5 ft) cable |
1 |
 |
LR410 (16641) |
Scanner
has hot LED /880NM |
7 |
 |
LSF-1 (16318) |
LSF-1 Light Only Fiber |
2 |
 |
MB5
(16332) |
M Series Amplifier Plug-in Logic Module
Modulated Photoelectric Amplifier
Power Input: +12 to+18 VDC
Module Output: 250 ma Max, Sink to GND. |
1 |
 |
MB5-14
(16337) |
M Series Amplifier Plug-in Logic Module
Modulated Photoelectric Amplifier
Power Input: +12 to+18 VDC
Module Output: 250 ma Max, Sink to GND. |
1 |
 |
MB8-1 (16344) |
M Series Amplifier Plug-in Logic Module
Modulated Photoelectric Amplifier
Power Input: +12 to+18 VDC
Module Output: 250 ma Max, Sink to GND. |
1 |
 |
MRB-T (16353) |
C hassis |
3 |
 |
OS-8
(16383) |
OS-8 Octal Socket |
1 |
|
 |
PBA-1 (16385) |
MULTI-BEAM: 3 and 4 wire power block
Range: depends on sensor; Input: 105-130V ac
Output: For emitters only
Wiring Chamber |
1 |
|
 |
PBAQ (16603) |
MULTI-BEAM: 3 and 4 wire power block
Range: depends on sensor; Input: 105-130V ac
Output: SPST solid-state switch - N.C.
Wiring Chamber |
1 |
|
 |
PBD (16390) |
MULTI-BEAM: 3 and 4 wire power block
Range: depends on sensor; Input: 22-28V ac
Output: SPST solid-state switch, 120 VAC 100 VA
Wiring Chamber |
11 |
|
 |
PBN (16673) |
MULTI-BEAM Series: 3- and 4-wire DC Power Block
Input: 10-30 VDC
Output: 250 mA |
11 |
 |
PBT (16393) |
MULTI-BEAM: 3 & 4 Wire Power Block
Range: depends on sensor; Input: 10-30V dc
Output: One open-collector NPN transistor
Wiring Chamber |
1 |
 |
PL5R (16407) |
Plug-in Logic Relay |
1 |
 |
PS15-1
(16410) |
Power
Supply Plug-in Module
Used with BRB Control Chassis |
10 |
 |
PT250 (16413) |
Remote Sensor: Receiver
Range: 2.4 m
Use Amps: MICRO: MA3-4 MA3-4P; MAXI: CM Series
2 m (6.5 ft) cable |
9 |
 |
PT250-B
(16414) |
Photoelectric Scanner |
1 |
 |
PT410 (16418) |
Phototransistor Receiver, Scanner |
7 |
 |
REG3 |
B3-1500
Photoelectric Amplifier Plug-in Logic Module
On-Off Relay (Regulated Lamp)
Input: 10-15 Volts AC or 14-20 Volts DC
Output: 15 Volts DC, 0.250 Amps Max. |
1 |
 |
SBC1 (17623) |
MULTI-BEAM: 3/4 Wire Scanner Block - Convergent
Focal Point: 38 mm; Input: depends on power block
Output: depends on power block
Interconnecting Pins |
5 |
 |
SBC1-6
(18549) |
MULTI-BEAM: 3/4 Wire Scanner Block - Convergent
Focal Point: 0.15 m; Input: depends on power block
Output: depends on power block
Interconnecting Pins |
1 |
 |
SBCV1 (17624) |
MULTI-BEAM: 3/4 Wire Scanner Block - Convergent
Focal Point: 38 mm; Input: depends on power block
Output: depends on power block
Interconnecting Pins |
2 |
 |
DX1
SBDX1 (16648) |
MULTI-BEAM: 3/4 Wire Scanner Block - Diffuse
Range: 2 m; Input: depends on power block
Output: depends on power block
Interconnecting Pins |
78 |
 |
SBFX-1
(16652)
FX1 |
MULTI-BEAM: 3/4 Wire Scanner Block - Fiber Optic
Range: depends on fiber; Input on power block
Output: depends on power block
Interconnecting Pins |
8 |
 |
SM312LVAGQD
(26913) |
MINI-BEAM: Polarized Retro
Photoelectric Sensor
Range: 50 mm to 2 m; Input: 10-30V dc
Output: Bipolar: 1 NPN; 1 PNP
Quick-Disconnect Connector |
2 |
 |
SM51E-A
SM51E |
Self-Contained
Modulated LED Emitter, Scanner
Voltage: 12 - 18 VDC
Output: Complementary open collector NPN transistors with emitters grounded |
5 |
 |
SM51E-B
(18585) |
SM512 Series: Emitter, Scanner
Range: 8 m; Input: 10-30V dc
Output: Not applicable - No outputs
2 m (6.5 ft) cable |
1 |
 |
SM51R-A |
Self-Contained
Modulated LED Receiver, Scanner
Voltage: 12 - 18 VDC |
5 |
 |
SM51RA6 |
Self-Contained
Modulated LED Receiver, Scanner
Voltage: 12 - 18 VDC |
1 |
 |
SM51RBL
(18653) |
Self-Contained
Modulated LED Scanner
Voltage: +10 to +30 VDC
SM51 Series |
1 |
 |
SM91R (30123) |
VALU-BEAM: Receiver
Range: 60 m
Input: 10-30V dc
Output: Bipolar: 1 NPN; 1 PNP
12" cable with Bendix
10-1393-143 Plug |
1 |
 |
SMA611 |
Photoelectric LED
Retroreflective Scanner |
4 |
 |
SMA61E |
Photoelectric LED Emitter |
3 |
 |
SMA61R |
Photoelectric LED
Receiver, Scanner
Voltage: 120 VAC 60Hz
Scanning Range: 50 ft |
4 |
 |
SMA91E
(25174) |
VALU-BEAM: Emitter
Range: 60 m; Input: 10-250V ac/dc
Output: Not applicable - No outputs
2 m (6.5 ft) cable |
1 |
 |
SMA91R
(25175) |
VALU-BEAM
Receiver, AC Scanner |
1 |
 |
SMB300
(16697) |
Bracket: Right Angle
Steel right-angle bracket for 2-axis mounting
Clearance slot for mounting LR/PT400
Used with SP300, LR/PT400, LP400WB, LR/PT200 |
6 |
 |
SMB500
(16696) |
Bracket: Universal Steel Mounting
Material: Bright zinc plated |
13 |
 |
SMB700
(16640) |
Bracket: Right Angle Mounting
Material: 11 Gauge Stainless Steel
2-axis mounting
Supplied with cable gland assembly and lockwasher |
1 |
 |
SMB900
(25285) |
Bracket: Right Angle Mounting
Material: 11 Gauge Stainless Steel
curved mounting slot for versatility/orientation \ |
1 |
 |
SP510 (16499) |
Retroreflective LED Scanner
Input: 5 to 30 VDC |
2 |
 |
SP510D
(16500) |
Retroreflective LED Scanner
has hot LED /880NM |
3 |
 |
SP510WP |
Photoelectric LED Scanner
5 - 30 VDC |
2 |
 |
TM-1 (16518) |
Photoelectric Test Module
Designed specifically for the setup, testing, and alignment of photoelectric
systems. |
4 |