|
| |
Home
> Index
> Bijur
Available Items by Bijur
Lubricating Company
Lubricators
| |
Type |
Part Number |
Description |
Qty
in Stock |
 |
UAB-220V |
D-151/102 |
SPRAY
MIST COOLANT UNIT
Voltage: 220/240, 50/60 Hz
Shpg Wght. 9 Lbs. |
3 |
|
|
UAC-440V |
D-152 |
SPRAY
MIST COOLANT UNIT
Voltage: 440/480, 50/60 Hz
Shpg Wght. 9 Lbs. |
2 |
Self contained assembly,
including a reservoir, air filter, water trap, pressure regulator and solenoid
valve. Used in a Spraymist
Cooland System to supply coolant in a mist form, for cooler, faster and cleaner
machining.
18 Ounce Reservoir, 1/4" Air inlet , 125 PSI Max. Inlet Pressure, Normal
Operating Pressure 15 to 40 PSI,
1/8" NPT Liquid Outlet, 1/2" Conduit Electrical Connection.
Approx. Air consumption- per Jet: one cfm of free air when operated at 30 PSI
Average Coolant Consumption: 23 oz./hr/jet
Coolant Delivery Range: 0 to 60 oz./hr/Jet.
| |
Part Number |
Description |
Qty
in Stock |
 |
B-0136 |
SPRAY-MIST
JET |
17 |
| |
Part Number |
Description |
Qty in
Stock |
 |
C-1957 |
TYPE K LUBRICATOR
ONE SHOT
KIB - 1-1/2 Stroke |
2 |
 |
C-2367 |
TYPE K LUBRICATOR
ONE SHOT
KIC |
0 |
The Bijur Type K lubricator is of the spring discharge type and is operated
by pulling a handle which raises the
piston and compresses a spring. By releasing the handle discharge of oil into
the system is automatic.
Average discharge pressure 60 Lbs/sq.in.
Pumps
| |
Part Number |
Description |
Qty in
Stock |
|
 |
C-2347 |
GEAR PUMP
Shpg Wght. 3 Lbs. |
25 |
Bijur gear pump is driven from a rotating machine shaft either direct or by
means of a gear or chain drive suitable ratio.
Drive Speed 20 R.P.M. Min to 1000
RPM Max.
Discharge: 50 cu.cm./100 RPM
Discharge Pressure: 180 PSI Max.
Shaft: .3745" dia x 3/4" w/ .751 dia x .067 deep pilot
1/8" NPT Inlet and Outlet
Junctions and Junction Bars
| |
Part Number |
|
Description |
Qty in Stock |
|
 |
B-1503 |
|
JUNCTION
HEADER 3-WAY |
277 |
 |
B-3150 |
|
JUNCTION
HEADER 4-WAY |
296 |
 |
B-3264 |
|
JUNCTION
6-WAY SINGLE |
40 |
 |
B-3785 |
|
JUNCTION
BAR 6-WAY SINGLE |
2 |
 |
B-3265 |
|
JUNCTION
8-WAY SINGLE |
4 |
Metering units
|
Meter units are oil proportioning
devices for cyclic systems. Each outlet of a Bijur lubricating system is
controlled by a meter unit. The lubricator in the system dispenses known
amounts of oil to the distribution network & meter units deliver
this oil in varying amounts to the bearing points.
APPLICATION
Meter units can only be used in cyclic
operation lubrication systems. Note: Should not be used with continuous
delivery systems. Meter units feed in one direction only.
IDENTIFICATION
Each meter unit is stamped with a letter and
number designation. When ordering, specify the complete symbol and part
number as follows (Example): Meter Unit, Type FSA-0, Part Number
B1083.OIL DELIVERY
RATES
Standard flow rates range from 00(slow) to
4(fast). 3/0(extra slow) and 5(extra fast) rates are also available.
Each incremental increase in rate size doubles the oil flow to a point.
TYPES & INSTALLATION
Straight type (FSA & FT) are mounted
directly at bearings. Junction type (FJB & FJD) are screwed into tapped
holes in junctions.
DISTRIBUTION TUBING
FSA uses 5/32” diameter main line tubing
FT screws directly to Tee headers (no tubing used).FJB uses 5/32”
diameter tail tubes.
General note:
5/0 is slowest rate (greatest choking effect). 5 is highest (least
choking effect). |
|
Type FSA |
Flow |
Part Number |
Description |
Qty in Stock |
|
 |
 |
FSA-00 |
B-1620 |
METER
UNIT |
119 |
FSA-0 |
B-1083 |
METER
UNIT |
15 |
FSA-1 |
B-1084 |
METER
UNIT |
34 |
FSA-2 |
B-1085 |
METER
UNIT |
22 |
FSA-4 |
B-1087 |
METER
UNIT |
18 |
|
|
|
|
|
|
|
Type FTC |
Flow |
Part Number |
Description |
Qty in Stock |
 |
 |
FTC-00 |
B-1530 |
METER
UNIT |
65 |
|
|
|
|
|
|
|
|
|
|
|
|
Type FTG |
Flow |
Part Number |
Description |
Qty in Stock |
|
 |
 |
FTG-00 |
B-2759 |
METER
UNIT |
170 |
|
|
|
|
|
|
|
Type FKB |
Flow |
Part Number |
Description |
Qty in Stock |
 |
 |
FKB-00 |
B-3980 |
METER
UNIT |
19 |
|
Type
FKA |
Flow |
Part Number |
Description |
Qty in Stock |
 |
|
FKA-0 |
|
METER
UNIT |
40 |
|
Type MSA |
Flow |
Part Number |
Description |
Qty in Stock |
 |
|
MSA-5 |
|
METER
UNIT |
23 |
|
|
Note 2:
5/16-24 for 5/32 tubing connections |
Note 5:
1/8 NPT |
Control Units
|
 Control units are continuous flow proportioning devices.
Each outlet of a continuous lubricating system is provided with a
control unit. While the lubricator measures the total oil feed to the
system, the control unit proportions the feed to the bearings.
APPLICATION
Control units Type C must be used with all
continuous type lubricators (cannot be used with cyclic lubricators).
Control units feed in direction of arrow.
IDENTIFICATION
Each control unit is identified by an
alphanumeric stamp on its surface which indicates its type and flow
rate.
OIL DELIVERY RATES
Standard flow rates range from 5/0(extra
slow) to 5(extra fast). Each incremental increase in rate size doubles
oil flow to a point.
TYPES & INSTALLATION
Straight type (CSA and CT) are mounted
directly at bearings. Junction type (CJB and CJD) are screwed into
tapped holes in junctions |
| |
Flow |
Part Number |
Description |
Qty in Stock |
 |
 |
CSA-4
|
B-6759 |
CONTROL
UNIT |
174 |
CSA-5
|
B-6760 |
CONTROL
UNIT |
269 |
CSA-5/0 |
B-7022 |
CONTROL
UNIT |
144 |
CSA-4/0 |
B-7023 |
CONTROL
UNIT |
230 |
|
|
|
|
|
|
| |
Flow |
Part Number |
Description |
Qty in Stock |
 |
 |
CJB-5/0 |
B-7034 |
CONTROL
UNIT |
53 |
CJB-4/0 |
B-7035 |
CONTROL
UNIT |
30 |
|
|
|
|
|
|
|
|
|
|
| |
Flow |
Part Number |
Description |
Qty in Stock |
 |
 |
CTD-3/0 |
B-7182 |
CONTROL
UNIT |
20 |
|
|
|
|
|
|
| |
Flow |
Part Number |
Description |
Qty in Stock |
|
 |
CKA-4/0 |
B-7123 |
CONTROL
UNIT |
4 |
|
|
|
|
|
|
| |
Flow |
Part Number |
Description |
Qty in Stock |
|
 |
CT-4 |
B-7029 |
CONTROL
UNIT |
9 |
Note 1:
5/16-24 for Bijur tapped
Note 2:
5/16-24 for 5/32 tubing connections |
Note 5:
1/8 NPT |
Other Available Items
| |
Part Number |
Description |
Qty in Stock |
 |
A-2309 |
ELBOW
CONNECTOR |
700 |
 |
A-2835 |
ADAPTOR |
9 |
 |
A-2899 |
COUPLING
FEMALE |
12 |
 |
A-3920 |
ADAPTOR |
7 |
 |
A-805 |
PUMP
CUPS |
100 |
 |
B-0144 |
HOSE
INSERT |
7 |
 |
B-3610 |
COMPRESSION
NUT |
60 |
 |
B-3784 |
CLOSURE
PLUG |
22 |
|
