DYMATIC, INC
5328 N. Northwest Hwy.
Chicago, IL 60630-1137 USA
TEL:  
773-763-2100 FAX: 773-763-6877





                                Our 20th year  of
 Selling "Surplus Inventories, at Surplus Prices"

 .
For Price and Delivery
E-mail us at: sales@oemsurplus911.com or Call Us at: 773-763-2100
.

Home Index by Mfg Hydraulics Pneumatics Automotive Electrical Filters Casters About Us

Index by Mfg.

Aeroquip
Airroyal Cylinders  
Allen Bradley
Alco Valve
Al Xander / AXCO
Allied Witan
American Coupling
American Heat Exch.
Ametek / US Gauge
Anchor Fittings
Aro Modernair
Aschroft Gauge
Aschroft / Dresser
Atlas Cylinders
Autoclave Eng.
Barksdale
Bendix Aerospace
    / Lucas

Bearings
Bijur
Bimba
Bodine Motors
Borg and Warner
Brand Hydraulics
Brown & Scharpe
Browning
Brunning Parker
C.A. Norgren
Cessna
Char- Lynn
Circle Seal
Commercial Shearing

Continental Hyd.
Cross Mfg.
Daman Subplate
Danfoss
Data Logic
Delta Power
Deltrol
73 Mfg. Co.
Denison Hydraulics

Detroit Coil
Double A Hydraulics
Dowty
Duff Norton
Dwyer
Eastern / LFE
Enerpac
Facet Filters
Fairchild
Firestone
Fischer & Porter
Fram Filters
Gates Fittings
Generant
Gresen
Haenni Gauges
Hedland
Helicoide
Hi-Flex Fittings
HTC
Hub City
Hycon
Hydreco
Hydro-Craft
Imperial Eastman

Jaco
Kebby Tank Acc.
Keystone Valves
Legris
Lenz Fittings
Lenz Filters
Lenz Gauges
Lexair / Airmatic
LittleFuse
Lha
Lube Devices
Lucas / Bendix
Main Flanges
Manastrip
Microswitch
NCC
Norgren
Norman Filters
  (Ultraporous)
Numatics
Nycoil
Oil Dyne
Oil Gear / Hydura

Parker Hydraulics
Parker Fittings
Perfecting
Pepperl & Fuchs
Plast-O-Matic
Prince
Purolator
Racine
Refilco
Rexroth
Ringfeder
Ross - TRW
Schroder
Squre D
Skinner Valves
Skinner Parts
Snap-tite Couplings
Snap-Tite Valves
SOR
Specialty Products
Sta-rite
Strahmann Valves
Stratoflex Fittings
Sauer Sundstrund
Suntech-
         Sundstrand
Swagelock Fittings
Synflex Fittings
Telemecanique
Tyrone
UCC
Ultraporous Filters
U.S. Gauge
Utec
Veriflo
Versa
Vican Pumps
Vickers
Viking
Watts Regulator
Weatherhead
Weschler / NES
White
Young Radiators
Zinga
Zycron

Brand Hydraulics Available in Stock Inventory

SERIES AO -- 4 WAY DIRECTIONAL CONTROL VALVES
GENERAL INFORMATION
The Brand, 4-way directional control valve is designed to be durable and dependable. The manually shifted handle provides metered flow to either port. Port flow is directly proportional to the movement of the lever. The tank port must go directly back to tank.
FEATURES:
  • SMALL AND COMPACT to fit your design requirements.
  • POSITIVE METERING in either direction with the manually shifting handle.
  • PRECISION GROUND CHROME PLATED SPOOL that assures long life.
SPECIFICATIONS:
  • Rated for 0-18 gpm (0-68.1 lpm).
  • Rated for 3000 psi (207 bar).
  • Weighs 5-1/2 lbs. (2.5 kg).
  • Std. Port sizes (Consult factory for others).
    • 3/4"NPT Inlet/outlet and 1/2" NPT work ports.
    • #12SAE Inlet/outlet and #10SAE work ports.
  • 30 - Micron filtration recommended.
MATERIALS:
  • Cast Iron Body.
  • Buna N O’Rings
  • IOSSO Plated Steel Spool
  • Consult Factory for Stainless Steel Spools
  • Black Nylon Ball Knob
Picture

Part Number

Description

In Stock
Qty

AO755-C4-LRS

AO Series Valve
3/4" NPTF Inlet/Outlet, 1/2" Work Ports
Closed Center 4-way Spool, L style actuator but No handle, Adjustable Relief, Spring Center
Shpg Wgt. 7 Lbs

1


 

DC SERIES  DIRECTIONAL CONTROL VALVES
GENERAL INFORMATION

The The Brand DC directional control valve can be used in series but the spool is difficult to shift when there is tank pressure. The DC offers an optional high lift ball spring relief to take the place of the standard pilot operated relief on the DCF. The manual handle provides metering to either port. The tank port must be plumbed directly back to tank.

SPECIFICATIONS:
  • Rated for 0-45 gpm (0-170 lpm).
  • Rated for 3000 psi (207 bar).
  • Weighs 16 lbs. (7.3 kg).
  • 20--Micron filtration recommended.
MATERIALS:
  • Cast Iron Body
  • Buna N O’Rings
  • IOSSO Plated Steel Spool
  • Consult Factory for Stainless Steel Spools
Picture

Part Number

Description

In Stock
Qty

DC100-C4-LBD

DC Series Directional Control Valve
1" NPTF All Ports, closed center 4-way spool, L style actuator but No handle, high lift ball spring relief and three-position detent. Shpg Wgt. 17 Lbs

2


 

SERIES 34 -- SECTIONAL DIRECTIONAL CONTROL VALVES
GENERAL INFORMATION 
When assembled in their normal manner the series 34 spool sections are in parallel. When the spools are in neutral position the flow passes by each spool and then onto the tank (outlet) port. If two or more spools are shifted simultaneously their work ports are in parallel, and the oil flow will take the path of least resistance allowing lighter loads to move first. All spool sections are cast with metering notches, and have a high “handle vs. spool” movement ratio, resulting in good metering capability. Input flow can be divided among several circuits (spool sections) by feathering the spools. Series 34 spool sections may also operate in series by installing a series block in between each spool section. Please note that when using series blocks in an assembly it is necessary to use a drain block immediately after the inlet in order for the inlet’s relief to function correctly.
SPECIFICATIONS:
  • 12 gpm Nominal Capacity
  • 3500 psi (241 bar).
  • 400 psi (27 bar) max tank pressure.
  • 12 sections max (consult factory for more).
  • 10 Micron Filtration Recommended.
  • Assembly Torque = 85 inch-lbs.
  • Port Sizes
    • Inlet/outlet #10SAE (7/8 - 14).
    • Work Ports #8SAE (3/4 - 16).
MATERIALS:
  • Cast Iron Body.
  • Hard Chrome Plated Steel Spools
  • Buna N O’Rings (standard).
  • Stress Proof Steel Handles & Tie Rods
  • Delrin Load Check Poppet
     
Picture

Part Number

Description

In Stock
Qty

34A-FCR

Series 34 Cross over relief valve, bolt on type,
for spool sections with M in model code.
Shpg Wgt. 4 Lbs

2

34A-FDL

Series 34 Double lock valve, bolt on type,
for spool sections with M in model code.
Shpg Wgt. 4 Lbs

2

34A-SB

Series 34, Series block, installed in between two spool sections puts them in series.
Shpg Wgt. 3 Lbs

3

34A-SD

Series 34, Series drain block, required for inlet relief to function correctly when using series block(s) in an assembly.
Shpg Wgt. 3 Lbs

3

34B-F04D

Series 34 Low Spool Section, Open Center, 4-way
3 Position detent
Shpg Wgt. 5 Lbs

15

34B-F04S Series 34 Low Spool Section, Open Center, 4-way
Spring Centered
Shpg Wgt. 5 Lbs

8

34B-FT4K

Series 34 Low Spool Section, Tandem Center, 4-way
4th Position Float / Spring Center (Last Spool Only)
Shpg Wgt. 6 Lbs

1

34P-G120

INLET WITH RELIEF
Shpg Wgt. 4 Lbs

2

34P-G2B20

Series 34 Inlet Section
Top Porting, Adjustable Ball Spring Relief Valve
(2000 PSI Setting) Shpg Wgt. 4 Lbs

3

34P-G1C

Series 34 Inlet Section
End Porting, Area Diff. Cartridge Relief
Shpg Wgt. 4 Lbs

1

34T-GIB

Series 34, End Spool Section
End Porting, Machined for power beyond with cartridge
Shpg Wgt. 4 Lbs

8


 

B SERIES FLOW DIVIDERS
GENERAL INFORMATION

The Brand, non-adjustable, proportional flow divider comes in two basic models B50, and B100. The B series receives a single stream of fluid and divides it into two output streams. The ratio of division to the two outlets will remain constant even though the work being done by one of the streams is much greater than the work being done by the other. The ratio of the outlet flows, remains constant even when the input flow increases or decreases. B100AB--is very similar to the B100 in that it is a non-adjustable proportional divider and has free reverse flow for both outlets, in addition it offers automatic adjustable bypass for each outlet. If one cylinder ends its stroke ahead of the other, the bypass to the lagging cylinder will automatically open and allow the lagging cylinder to finish its stroke. The two outlet flows are pressure compensating and the sum of said flows equals the inlet flow.

FEATURES:
  • PRECISION GROUND HEAT TREATED SPOOL that assures long life.
  • PRESSURE COMPENSATION for both outlets.
  • EVERY B IS TESTED for flow ratio and pressure compensation.
  • DIVIDES INLET FLOW INTO TWO FLOWS of equal flow or a ratio
  • OPTIONAL FREE REVERSE FLOW (B100) allows fluid to move from the outlet ports to the inlet port.
SPECIFICATIONS:
  • Rated for 3000 psi (207 bar).
  • BX50 is rated for 25-45 gpm (94-170 lpm).
  • B100 is rated for 30-120 gpm (113-454 lpm
  • 30-Micron filtration recommended.
MATERIALS:
  • High Strength Cast Iron Body (BX50)
  • Cast Iron Body (B100)
  • Buna N O’Rings
  • Heat Treated Steel Spool
  • Delrin Free Reverse Check Seat
Picture

Part Number

Description

In Stock
Qty

B100AB-3/8

Flow Divider, 2-8 GPM
3/8" NPT ports, free reverse flow for both outlets, automatic adjustable bypass for both outlets and divides at 50:50 ratio. Shpg Wgt. 9 Lbs

1

B50 or B100

Flow Divider
No Part Number on Units!
Shpg Wgt. 6 Lbs

2


 


Brand Hydraulics Accessories and Repair Parts

Picture

Part Number

Description

In Stock
Qty

P1158

Foot Bracket

43

B5020-38

Spool

10

HANDLE #1 "J" Handle 5/16" Rod Dia x 10-1/2" Length, Bent 8
HANDLE #2 "J" Handle 3/8" Rod Dia x 8" Length, Bent 10
HANDLE #3 "J" Handle 3/8" Rod Dia x 8-1/2" Length, Straight 2
HANDLE #4 "L" Handle 3/8" Rod Dia x 8-1/2" Length 16
HANDLE #5 "L" Handle 1/2" Rod Dia x 9-1/2" Length 7
HANDLE #6 Handle 1/2" Rod Dia x 5-1/2" Length, Plain Bent End 4
TIE ROD Tie Rod  5/16" Rod Dia x 12" Length, Threaded Ends 11

 

 

Don't see it here ????    Call 773-763-2100

We have more items in stock than we are able to list !
If you don't see it on our site or would like price and delivery on an item
that you did see  
Call 773-763-2100
Fax   773-763-6877

 or  
e-mail
sales@oemsurplus911.com

 

vmda.gif (9904 bytes)
We accept all major credit cards.

DYMATIC, INC.

5328  N. NORTHWEST HWY.
CHICAGO, IL 60630-1137
TEL:   773-763-2100
FAX:   773-763-6877

Due to the nature of our business, prices, specifications, availability's are subject to change without notice.
Manufacturers names and p/n's are used for reference only, and are the property of the companies.
Viton´┐Ż is a registered trademark of DuPoint Performance Elastomers
Minimum order applies in some cases  !!!!!!